Parameters for rotary/slide encoder

This parameter determines the type of sensor operation.

If the sensor also has a pressure function, this parameter determines which command is to be sent when it is pressed.

This parameter specifies which brightness value is to be sent when the button is pressed.

Only visible if the parameter "When pressing" = "Send value" has been set.

This parameter defines the reaction, depending on the direction of rotation.

This parameter defines the reaction, depending on the slide direction.

At this point, the disabling function of the sensor channel can be activated.

If this checkbox is activated, the ETS shows further communication object and parameters.

When the disabling function is activated, the function configured here is triggered.

The "Send value" selection is only visible if the "Switching/brightness value transmitter" sensor function is set.

When disabling is cancelled, the function configured here is triggered.

The "Send value" selection is only visible if the "Switching/brightness value transmitter" sensor function is set.

This parameter defines the value of the disabling object at which the disabling function is active.

If the sensor also has a pressure function, this parameter determines which command is to be sent when it is pressed.

This parameter defines the reaction of the brightness setting, depending on the direction of rotation.

When the advanced parameters are activated, the ETS shows the following parameters.

This parameter sets the relative dimming level when dimming. On each button actuation, the brightness is changed at maximum by the configured step width.

If the checkbox is activated, the device transmits a telegram for stopping the dimming process when the button is released.

When the device transmits telegrams for dimming in smaller levels, the stop telegram is generally not needed.

This parameter defines the reaction of the colour temperature setting when pressing and rotating at the same time, depending on the direction of rotation.

When the advanced parameters are activated, the ETS shows the following parameters.

This parameter sets the relative dimming level when dimming. On each button actuation, the brightness is changed at maximum by the configured step width.

If the checkbox is activated, the device transmits a telegram for stopping the dimming process when the button is released.

When the device transmits telegrams for dimming in smaller levels, the stop telegram is generally not needed.

At this point, the disabling function of the sensor channel can be activated.

If this checkbox is activated, the ETS shows further communication object and parameters.

When the disabling function is activated, the function configured here is triggered.

The "Send value" selection is only visible if the "Switching/brightness value transmitter" sensor function is set.

When disabling is cancelled, the function configured here is triggered.

The "Send value" selection is only visible if the "Switching/brightness value transmitter" sensor function is set.

This parameter defines the value of the disabling object at which the disabling function is active.