Objects for Human Centric Lighting (HCL)

Daytime colour temperature sequence (HCL) - Start/stop

Group 1...32 / Single device 1...64

1-bit

1,003

C, -, W, -, U

1-bit object for starting and stopping a daytime colour temperature sequence ("1" = start, "0" = stop).

After the start, the execution of the daytime colour temperature sequence starts according to the current time and day of the week. When a stop is made, the execution of the daytime colour temperature sequence is immediately terminated.

Daytime colour temperature sequence (HCL) - Switch matrix

Group 1...32 / Single device 1...64

1-byte

17,001

C, -, W, -, U

1-byte object for switching the effective HCL matrix (1...4) during operation of the gateway.

In principle, it is only possible to switch to the four HCL matrices configured in the ETS. There is no reaction if a matrix number (5...64) is received by means of the switch-over object not included in the configuration of the matrices.

After an ETS programming operation or the mains voltage returns, the last switchover by means of the object is lost (object value "0"). A new telegram must first be received so that a new switchover becomes active.

Daytime colour temperature sequence (HCL) - Status

Group 1...32 / Single device 1...64

1-bit

1,003

C, R, -, T, A

1-bit object for displaying the status of the active daily colour temperature curve (HCL). ("1" = day colour temperature curve active, "0" = day colour temperature curve not active)

Daytime colour temperature sequence (HCL) - Active matrix

Group 1...32 / Single device 1...64

1-byte

17,001

C, R, -, T, A

1-byte object for displaying the status of the active HCL matrix (1...4) during gateway operation.