Objects for brightness

Switching - Setting

Group 1...32 / Single device 1...64

1-bit

1,001

C, -, W, -, U

1-bit object for switching the group or single device.

Dimming - Default

Group 1...32 / Single device 1...64

4-bit

3,007

C, -, W, -, U

4-bit object for relative dimming of the brightness of the group or single device.

Brightness value - Setting

Group 1...32 / Single device 1...64

1-byte

5,001

C, -, W, -, U

1-byte object for specifying an absolute brightness value within the limits of the minimum to maximum brightness.

Relative dimming (brightness value and colour temperature) - Setting

Group 1...32 / Single device 1...64

3-byte

250,600

C, -, W, -, U

3-byte object for the combined relative dimming of the brightness and colour temperature by means of separate dimming increments and dimming directions.

This object is available only in the "Colour temperature control" function range.

Absolute dimming (brightness value and colour temperature) - Setting

Group 1...32 / Single device 1...64

6-byte

249,600

C, -, W, -, U

6-byte object for the combined absolute dimming of the brightness and colour temperature by means of separate dimming values and for the specification of a dimming time.

When dimming by means of the 6-byte combination object, it is possible to specify an individual dimming time in the KNX telegram. If a valid time is specified there, the gateway executes the dimming time transmitted in the KNX telegram and not the one specified in the ETS. The colour temperature and brightness specified in the telegram value is then dimmed to within the transmitted dimming time (fading). If the time is defined as "invalid" in the telegram, the gateway always executes the dimming behaviour defined in the ETS parameters during absolute dimming.

This object is available only in the "Colour temperature control" function range.